Lorric F30-PC-WD5 Variable Area Flow Meter

RM409 excl Tax

Lorric F30 Variable Area Flow Meter for flow range from 6.0 – 60 LPM with 1″ welding adaptor. 5% high accuracy with polycarbonate body. AISI 316 float and guided rod.

Usually ships in 2 to 4 weeks

Description

Lorric F30-PC-WD5 Product Configurations

P/N: F30-PC-WD5
F30 - 1" Connection 
PC - Polycarbonate Body 
WD - Welding Adaptor 
5 - Flow Range from 6.0 - 60 LPM 





Lorric F30 Variable Area Flow Meter Product Highlights

  • Lorric F30 is suitable to use for liquid.
  • The F30  is an economic flow meter and popular because it is easy to install, precise and economical.
  • Dual-indicator design is our patented design where it allows user to easily point out the low and high flow range.
  • Due to the flow meter has double indicators, it allows user to define the flow range easily.
  • Accuracy for Lorric liquid flow meter is 5% of full scale. It can withstand pressure up to 6kg/cm2.
  • The smallest measuring scale for this series is 2.0 LPM and the highest can goes to 100 LPM.
  • Total length for this F30 series rotameter is 270mm for thread connection and 255mm for welding connection.The reading scale is 172mm.
  • Lorric F30 economic flow meter comes with 1″ male or female BSPT thread adapter.
  • However, Lorric F30 flow meter is also available in 1″ welding adaptor as the optional connection.
  • F30 series water meter is available in polysulfone(PSU) or polycarbonate(PC) material.
  • Due to it has polysulfone body, therefore it is chemical resistant. Flow meter with polysulfone(PSU) body is suitable to use for chemical and nonorganic solvents.
  • Furthermore, it is rigid, high-strength, and transparent.
  • Therefore, the flow meter with polysulfone body can resist temperature up to 100-degree celsius.
  • Meanwhile, Lorric F30 rotameter with polycarbonate (PC) can only resist temperature up to 50-degree celsius only.
  • This series has permanent laser cut scale for the longer lifespan.
  • The float inside the scale is made of AISI 316 material. Same for the guide rod, it is made with 316 Stainless steel.
  • Standard oring material is EPDM and viton.
  • Hastelloy float is also available for specific high PH liquid medium upon request.

Additional information

Weight2 kg