Signal Isolators / Conditioners

  • Adtek AT Series

    ● Output for 0~5V / 0~10V / 1~5V / 2~10V / 4~20mA / 0~20mA changeable by dip switches and terminals
    ● Dual different signals output available
    ● LED indications for power, input and output status
    ● 0.1% accuracy available in option
    ● 17.5 mm thin profile and 35mm DIN rail mounting
    ● CE Approved & RoHS

    Usually ships in 4 to 6 weeks

  • Adtek NT-RS

    ● Measures 2 Wire Resistances 0 ~ 100KΩ
    ● 4 two wire Resistance Range Programmable
    ● Dual difference output available with 6 Popular Output Ranges Programmable by dip switches 
    ● Plug into 11 pin DIN rail mounted base
    ● Low cost and high stability
    ● CE Approved 

    Usually ships in 4 to 6 weeks

  • Adtek NT-VA

    ● Measuring DC current: 0~20mA / 5A, DC voltage: 0~50mV / 600V
    ● 6 Popular Input and Output Ranges Programmable by Dip-Switch
    ● Input type Changeable by difference Input Modules
    ● Dual difference signal output available(Isolated)
    ● Low cost and high stability
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek NT-PM

    ● Measuring Potentiometer 0~50Ω/~50KΩ( 3 wired )
    ● 2 Input and 6 Popular Output Ranges 0~5V / 0~10V / 1~5V  / 2~10V / 0~20mA / 4~20mA Programmable by Dip-Switch
    ● Input type Changeable by difference Input Modules
    ●  Dual difference signal output available
    ● Low cost and high stability
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek NT-SG

    ● Measuring 1.0 mV/V ~ 50.0 mV/V for Load Cell, Strain Gauge
    ●  4 Input and 6 Popular Output Ranges Programmable by Dip-Switch
    ● Input type Changeable by difference Input Modules
    ● Dual difference signal output available
    ● Low cost and high stability
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek NT-TR

    ● Measuring Pt100Ω – 3 wired
    ● 4 Input and 6 Popular Output Ranges Programmable by Dip-Switch
    ● Input type Changeable by difference Input Modules
    ● Dual difference signal output available
    ● Low cost and high stability
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek NT-TC

    ● Measuring Thermocouple K, J, E, T, T, S…
    ● 6 Popular Output Ranges Programmable by dip switches
    ● Dual difference signal output available
    ● Low cost and high stability
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek MT-VI

    ● 6 Popular Input and Output Ranges Programmable by dip switches
    ● Changeable Input Module Between V/mA , Potentiometer, Strain Gauge, easy maintain and save stock
    ● Dual difference signal output available

    Usually ships in 4 to 6 weeks

  • Adtek MT-CL

    ● 6 Popular Input and Output Ranges Programmable by dip switches
    ● Changeable Input Module Between V/mA , Potentiometer, Strain Gauge, easy maintain and save stock
    ● Dual difference signal output available

    Usually ships in 4 to 6 weeks

  • Adtek MT-RT

    ● Measures 3 Wire Potentiometers and 2 Wire resistances
    ● 2 Pot Ranges and 4 two wire Resistance Range Programmable
    ● 6 Popular Output Ranges Programmable by dip switches
    ● Low cost and high stability

    Usually ships in 4 to 6 weeks

  • Adtek MT-SG

    ● 6 Popular Output Ranges Programmable by dip switches
    ● Load cell: 0 ~ 40.0mV / V ,4 range input by the DIP switch, easy maintain and save stock
    ● Low cost & high stability

    Usually ships in 4 to 6 weeks

  • Adtek MT-FD

    ● 10 popular Inputs and 4 popular Output (Programmable by dip switches)Ranges
    ● Modular Design, Easy Maintain and Save Stock;
    ● Changeable Output Module Between V/mA, Trip Relay with difference programming module
    ● Dual difference signal output available even for trip relay
    ● Low cost & high stability

    Usually ships in 4 to 6 weeks

  • Adtek MT-DA

    ●  4 Popular Input Ranges Programmable in One
    ● Modular Design, Easy Maintain and Save Stock;
    ● Dual trip relay output available
    ●  Low cost and high stability

    Usually ships in 4 to 6 weeks

  • Adtek MT-DF

    ●  4 popular Input and 8 Output Ranges Programmable by dip switches
    ● Dual isolated output is available
    ● Low cost and high stability

    Usually ships in 4 to 6 weeks

  • Adtek MT-FF

    ● 8 Outputs Range Programmable by dip switches
    ● Modular Design, Easy Maintain and Save Stock;
    ● Dual pulse output available

    Usually ships in 4 to 6 weeks

  • Adtek ST-VA

    ● Measuring Voltage or Current for DC / AC / TRMS
    ● Accuracy: ± 0.04% or ± 0.1%; Display range: -19999~29999
    ● User function, easily programmable via the top panel
    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection in 3 outputs
    ● Design by CE standard

    Usually ships in 4 to 6 weeks

  • Adtek ST-PR

    ● Measuring linear signal 0~10V / 0(4)~20mA in one controller
    ● Accuracy: ± 0.04%; 4 1/2 Digital display: -19999~29999
    ● User function, Easily programmable via the front panel
    ● 1 Analogue output, 1 RS 485 port, 3 Relay and Excitation Supply output available for multi-cross selection in 3 outputs
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek ST-RS

    ● Measuring resistance from 0~200Ω/2000Ω/20.0KΩ/200.0KΩ(2 Wire)
    ● Accuracy: ± 0.04%; Display range: -19999~29999
    ● User function, Easily programmable via the front panel
    ● Field calibration with resistance to meet the system requirement 
    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most.
    ●CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek ST-PM

    ● Measuring potentiometer from 0~50Ω/~2.0KΩ; 0~2.0KΩ/~100.0KΩ (3 wire)
    ● Accuracy: ± 0.04%; Display range: -19999~29999
    ●User function, Easily programmable via the front panel
    ● Field calibration with potentiometer to meet the system requirement
    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most.
    ●CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek ST-SG

    ● Measuring Stain Gauge signal range 0~1.0/~2.0/~4.0/~10.0/~20.0/~40.0mV/V specify
    ●  Accuracy: ± 0.04%; Display range: -19999~29999
    ● User function, easily programmable via the top panel
    ● Calibration with Strain Gauge in the field capability
    ● 1 Analogue output, 1 RS 485 port, 3 Relay output and Excitation supply available for multi-cross selection in 4 outputs
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek ST-RL

    ●Measuring Frequency AUTO RANGE 0.01Hz~100KHz / ~140KHz(optional) / Contact, NPN, PNP, Voltage pulse, Sine wave 30~600Vp
    ● Accuracy: ± 0.005%; Display range: 0~99999
    ● Decimal Point auto moving according to input frequency
    ● User function, easily programmable via the top panel
    ● 1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at most
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek ST-LC

    ● Measuring 2 channels 0~10V / 0(4)~20mA or 0~10.0mV/~100.0mV and single display screen with Mathematic function Addition / Subtraction / Multiplication / Division / high or low selector
    ● Isolated between input 1, input 2, output and power
    ● Plug-in conditioner with display and operating key
    ● Accuracy: ± 0.04%, Display range: -19999~99999
    ● 1 Analogue output, 1 RS485 port and 1 Relay output available for multi-cross selection 2 outputs at most.

    Usually ships in 4 to 6 weeks

  • Adtek ST-T

    ●Measuring RTD: Pt100Ω; Thermocouple: K, J, E, T, R, S, B/ Multiplication / Division / high or low selector
    ● Accuracy: RTD: ± 0.1%; Thermocouple: ± 0.2%
    ● User function, easily programmable via the top panel
    ●  1 Analogue output, 1 RS 485 port and 3 Relay output available for multi-cross selection 3 outputs at mos
    ● CE Approved

    Usually ships in 4 to 6 weeks

  • Adtek SD-PR

    ●  Input signal for 4~20mA(with excitation supply available)
    ● Output 4~20mA with loop powered, self powered or auxiliary powered available
    ● DIN rail mounting with Ultra slim in 7.6 mm profile
    ● CE Approved & RoHS

    Usually ships in 4 to 6 weeks

Showing 1–24 of 30 results