Gems Sensor & Control LS-1700 Series Single-Point Level Switch

Last Updated: 18/03/2019

Gems Sensor & Control 01702

GEMS Logo - Celectric

RM431

Usually ships in 4 to 6 weeks

Part Number: 01702 Categories: , ,

Buying offline? Contact Us or know more about us!
[email protected]
+604-502 1894
+6016-551 9084

Actuation Level9/16″
Switch OperationNormally Open (Reversible)
Min. Liquid0.45
Stem Material316 Stainless Steel
Float MaterialBuna
Float Diameter1″
Mounting Size1/8″ NPT Male
MountingVertical
Switch TypeSPST (20 VA)
InputN/A
OutputN/A
Maximum Pressure (PSI)300
Minimum Temperature (°C)-40
Maximum Temperature (°C)149
Electrical Termination22 AWG, 24″ long Polymeric leads
Wetted Materials316 Stainless Steel, Buna N, Epoxy
ApprovalsUL Recognized, CSA Listed, CE, ROHS

 

Description

Small compact level switches combines reliability with low cost. The LS-1700 Series Single-Point Level Switch unit is equipped with a hermetically sealed SPST 20 VA reed switch and is operated by permanent magnets within the float. As the float is raised and lowered with changing liquid level, the hermetically sealed single point level switch closes as the float comes into proximity of the reed switch. The switch logic can be reversed on most models by inverting the float on the stem via a removable float retaining clip. The 20 VA switch is suitable for most solid state control circuits, by using a relay interface the switch can be made capable of switching higher current loads. The unit is easy to install and can be top or bottom mounted. Using an extension pipe and proper sealing techniques the unit can be extended into the tank for high, intermediate, and low level actuation points. The LS-1700 brass/buna version is ideal for low hydraulic fluid warning and other hydrocarbon applications. It can be factory custom configured for volume OEM applications and used as a water or oil level switch.