Lorric F30 Series Variable Area Flow Meter

Start From - MYR 409.00 MYR 409.00
Product Brand : Lorric
HS Code : 9026
Model Number : F30
Weight : 1.00 KG

Availability:

  • Full Scale Accuracy: ±5%.
  • Max. working pressure: 6.0kg/cm2.
  • Applicable Fluid: Tape water / Chemical / Non Organic Solvent.
  • Rod Material: Polycarbonate (PC) / Polysulfone (PSU)
  • Recommended Highest Operating Temperature: 50°C (PC) / 80° (PSU)
  • Scale Range: Min 2.0LPM, Max 100LPM
  • Adaptor Size: 1" 
  • Adaptor Type: Welding / Male Thread / Female Thread
  • Guide Rod Material: AISI316
  • O-Ring Material: EPDM
  • Union Nut Material: PVC
  • Adaptor Material: PVC

Lorric F30 Variable Area Flow Meter Product Highlights

  • Lorric F30 flow meter is suitable to use for liquid.
  • The F30 Series is an economic liquid meter and popular because it is easy to install, precise and economical.
  • Dual indicator flow meter is our patented design where it allows user to easily point out the low and high flow range.
  • This dual indicator liquid meter allow the user to define the flow range easily.
  •  Accuracy for Lorric F30 flow meter is 5% of full scale.
  • It can withstand pressure up to 6kg/cm2.
  • The smallest measuring scale for this F30 series is 2.0 LPM and the highest can go to 100 LPM.
  • Total length for this F30 series rotameter is 270mm for thread connection and 255mm for welding connection.The reading scale is 172mm.
  • Lorric F30 economic flow meter comes with 1″ male or female BSPT thread adapter.
  • However, Lorric F30 flow meter is also available in 1″ welding adaptor as the optional connection.
  • F30 series water meter is available in polysulfone(PSU) or polycarbonate(PC) material.
  • Flow meter with polysulfone(PSU) body is suitable to use for chemical and nonorganic solvents. Furthermore, it is rigid, high-strength, and transparent. Therefore, the flow meter with polysulfone body can resist temperature up to 100-degree celsius.
  • Meanwhile, Lorric F30 rotameter with polycarbonate (PC) can only resist temperature up to 50-degree celsius only.
  • This series has permanent laser cut scale for the longer lifespan.
  • The float inside the scale is made of AISI 316 material.
  • Same for the guide rod, it is made with 316 Stainless steel.
  • Standard oring material is EPDM and viton.
  • Hastelloy float is also available for specific high PH liquid medium upon request.

WRITE YOUR OWN REVIEW

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Data Sheets

Lorric F30 Data Sheet