OWON HDS-N Series 2-Channel Digital Oscilloscope

Last Updated: 20/02/2019

OWON HDS1022M-N

OWON Logo

RM1,901

Usually ships in 2 to 4 weeks

Part Number:  HDS1022M-N  Categories: ,

Buying offline? Contact Us or know more about us!
[email protected]
+604-502 1894
+6016-551 9084

Description

  • 2 in 1 (DSO + Multimeter)
  • Auto-scale Function
  • FFT
  • 20 group automatic measurement options
  • Bandwidth : 20MHz – 200MHz
  • USB data transmission supported
  • Multimeter newly supported SCPI
  • Rechargeable Li-ion battery (6 hours’ backup)
  • Waveform record & restore

1. 2-in-1 station

Oscilloscope + 3 3/4 digits multimeter + FFT spectrum analyzer.  

2. Auto-scale Function

While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale and timebase scale according to the type, amplitude and frequency of input signal. 

3. Trigger Sensitivity Adjustable

While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale and timebase scale according to the type, amplitude and frequency of input signal.

 

4. Alternative trigger function

OWON HDS digital oscilloscope alternative trigger function support 2 simultaneous signal test, improve working efficiency.

Model HDS1022M-N 
 Bandwidth 20MHz
 Sample Rate (real time ) 100MS/s
 Horizontal Scale (s/div) 5ns/div~100s/div, step by 1~2.5~5
 Display 3.7” color TFT display (640 × 480 pixels)
 Channel dual
 Record Length6K points
 Input Coupling DC, AC, and GND
 Vertical Sensitivity 5mV/div~5V/div (at input)
 Vertical Resolution (A/D) 8 bits
 Trigger Type Edge, Video, and Alternate
 Acquisition Mode Sample, Peak Detect, and Average
 Waveform Math +, -, ×, ÷, invert, FFT
 Communication Interface USB
 Power Supply 100V-240V AC, 50/60Hz
 Li-ion Battery 7.4V, 6 hours’ operation
 Dimensions (W × H × D) 115 × 180 × 40 (mm)
 Weight (without package) 645.00 g
Multimeter Specifications
Full Scale Reading 3(3/4) digit (max 4000-count) diode 0V-1.5V
Input Impedance 10 MΩ On / Off Test < 50 (± 30) beeping
VoltageVDC : 400mV, 4V, 40V, 400V, 1000V : ±(1% ± 1 digit); max input : DC 1000V 
VAC : 4V, 40V, 400V : ±(1% ± 3 digits), 750V : ±(2% ± 3 digits); Frequency : 40Hz – 400Hz; 
max input : AC 750V (virtual value)
CurrentDC : 40mA, 400mA : ±(1.5% ± 1 digit), 10A : ±(3% ± 3 digits) 
AC : 40mA : ±(1.5% ± 3 digits), 400mA : ±(2% ± 1 digit), 10A : ±(5% ± 3 digits)
Impedance 400Ω : ±(1% ± 3 digits), 40ΚΩ – 4ΜΩ : ±(1% ± 1 digit), 40MΩ : ±(1.5% ± 3 digits)
Capacitance 51.2nF – 100uF : ±(3% ± 3 digits)

Data Sheet:
Instruction Manual: