Precision Digital PDW30 & PDW90 Wireless Repeater

Last Updated: 12/10/2018
Precision Digital Logo - Celectric

RM10,363

Buying offline? Contact Us or know more about us!
[email protected]
+604-502 1894
+6016-551 9084

SKU: PDW30 & PDW90 Category: Tag:
  • Retransmits Wireless Signals
  • Broadcasts Long Distances and Around Obstacles
  • Flanges for Wall or Pipe Mounting
  • NEMA 4X, IP68 Cast Aluminum Enclosure

Power: 12-28 VDC 
Accessory To: PDW30, PDW90, PDW90-BA, PDW90-FN 
Warranty: 3 years 

RM10,363

Usually ships in 2 to 4 weeks

Description

Wireless signal repeaters are used to retransmit wireless signals when connectivity is an issue. They are incredibly simple to install as they only require power and a network ID. Any units in range of the repeater with the same network ID will retransmit through it, thus increasing signal strength. Use repeaters to broadcast over very long distances or around permanent obstacles.

General

Display

32-character dual-line alphanumeric dot matrix LCD display with backlight
(4.68mm x 2.21mm characters)

Display Orientation

Display may be mounted at 180° from default orientation

Network ID

Field selectable: 0 – 99

Programming Methods

Four programming buttons (behind glass) or PC with PDW Manager software.

Recalibration

All inputs and outputs are calibrated at the factory. Recalibration is recommended at least every 12 months.

Process/ Digital I/O
Display

Press the display button once to display the present analog input and output, press the display button again to display digital I/O states.

Password

A programmable password restricts modification of programmed settings.

Power

12-28 VDC, 5 W max

Non-Volatile Memory

All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.

Isolation

500 V

Environmental

Operating temperature range: -40 to 65°C (display inoperable < -20 °C); Storage temperature range: -40 to 85°C; Relative humidity: 0 to 90% non-condensing

Connections

Removable screw terminal blocks accept 16 to 30 AWG wire.

Enclosure

Cast aluminum with glass window, 0.30% max copper content, corrosion resistant powder coating, color: blue. NEMA 4X/IP68. Two ½” NPT threaded conduit openings. One ½” NPT stainless steel conduit plug with 10 mm hex key fitting installed.

Mounting

May be mounted directly to conduit. Two mounting holes for 1.5″ pipe or wall mounting. See Mounting Dimensions on page 15 for mounting space requirements.

Tightening Torque

2.5 lb-in (0.28 Nm)

Shipping Dimensions

17″ x 14″ x 9″ (43.2 cm x 35.6 cm x 22.9 cm) (L x W X H)

Shipping Weight

5 lbs. (2.27 kg)

Warranty

3 years parts & labor

Wireless Radio

Frequency

900 MHz

Range

500 ft (152.4 m) indoor, 1 mi (1.61 km) outdoor (line-of-sight)

Encryption

AES 128-bit encryption available using PDW Manager software

Interference Reduction

Frequency Hopping Spread Spectrum (FHSS)

Power Output

24 dBm (250 mW)

Sensitivity

-101 dBm

PDW Manager Software

System Requirements

Microsoft® Windows® XP/Vista/7/8/10

Communications

USB 2.0 (Standard USB A to Micro USB B)

Configuration

Configure devices one at a time

Mounting Dimensions

Instruction Manual: LIMW30R Instruction Manuals